cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2192
Views
0
Helpful
11
Replies

IOS 12.2(33)SXI5 known bugs

Rosa Ladeira
Level 1
Level 1

I have 4 6509 boxes running Cisco IOS Software, s3223_rp Software (s3223_rp-IPBASEK9-M), Version 12.2(33)SXI5, RELEASE SOFTWARE (fc2).

Two of tem have rebooted by itself.

Cisco IOS Software, s3223_rp Software (s3223_rp-IPBASEK9-M), Version 12.2(33)SXI5, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Fri 22-Oct-10 14:31 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)

cat6509-wc1 uptime is 1 day, 7 minutes

Uptime for this control processor is 1 day, 7 minutes

Time since cat6509-wc1 switched to active is 1 day, 6 minutes

System returned to ROM by power on (SP by watchdog NMI at PC 0x409D3EF8, address 0x0)

System restarted at 09:06:26 BRST Tue Mar 6 2012

System image file is "sup-bootdisk:/s3223-ipbasek9-mz.122-33.SXI5.bin"

Last reload reason: Reload Command

I have looked for reasons but I did not find any. Does anybody know what is it ?

Thanks

Rosa

2 Accepted Solutions

Accepted Solutions

glen.grant
VIP Alumni
VIP Alumni

  you would have to get the tac involved and send them a show tech for them to analyze and see if they can see anything. 

View solution in original post

Leo Laohoo
Hall of Fame
Hall of Fame
System returned to ROM by power on (SP by watchdog NMI at PC 0x409D3EF8, address 0x0)

This is the reason why your supervisor card rebooted.  Don't know what that means, though.

Have you tried SXJ1 or SXJ2?

View solution in original post

11 Replies 11

glen.grant
VIP Alumni
VIP Alumni

  you would have to get the tac involved and send them a show tech for them to analyze and see if they can see anything. 

Thanks a lot, but unfortunately we do not have access to tac.

Rosa

Leo Laohoo
Hall of Fame
Hall of Fame
System returned to ROM by power on (SP by watchdog NMI at PC 0x409D3EF8, address 0x0)

This is the reason why your supervisor card rebooted.  Don't know what that means, though.

Have you tried SXJ1 or SXJ2?

Shame on me. I was blind.

But ... why do you have asked me for SXJ1 or SXJ2, if power is the real problem ?

Rosa

Hi Rosa ,

Can you paste a :

remote command switch show version

Dan

cat6509-wc1#show version         

Cisco IOS Software, s3223_rp Software (s3223_rp-IPBASEK9-M), Version 12.2(33)SXI5, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Fri 22-Oct-10 14:31 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)

cat6509-wc1 uptime is 2 days, 37 minutes

Uptime for this control processor is 2 days, 37 minutes

Time since cat6509-wc1 switched to active is 2 days, 36 minutes

System returned to ROM by power on (SP by watchdog NMI at PC 0x409D3EF8, address 0x0)

System restarted at 09:06:26 BRST Tue Mar 6 2012

System image file is "sup-bootdisk:/s3223-ipbasek9-mz.122-33.SXI5.bin"

Last reload reason: Reload Command

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C6509-E (R7000) processor (revision 1.4) with 458752K/65536K bytes of memory.

Processor board ID SMG1206N40E

R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache

Last reset from power-on

3 Virtual Ethernet interfaces

337 Gigabit Ethernet interfaces

2 Ten Gigabit Ethernet interfaces

1915K bytes of non-volatile configuration memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x102

cat6509-wc1#

But ... why do you have asked me for SXJ1 or SXJ2, if power is the real problem ?

Watchdog timer isn't a power issue.  It's either a bug or a hardware issue.

You sure you don't have any crashinfo files around?

We have  SXI5  on probably 30 6500's and its been very stable so far .  But ours are Sup 720's and not Sup 32's. 

We've moved from SXI5 to SXJ1.  Will be going up to SXJ2 by the end of this month.

Hi,

just to let you all know, SXI5 has some "ciritical" bugs which can case your boxes to reload. Many of them are fixed in SXI8a, but SXI is still a short-term release. If you wanna have a long-term release move to SXJ.

regards,

Dirk

regards, Dirk (Please rate if helpful)

Hi all ,

One of them is :

CSCtx50235 : 6500 crashes with SP due to RP and RP due to SP

Dan

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco