03-07-2012 04:48 AM - edited 03-07-2019 05:24 AM
I have 4 6509 boxes running Cisco IOS Software, s3223_rp Software (s3223_rp-IPBASEK9-M), Version 12.2(33)SXI5, RELEASE SOFTWARE (fc2).
Two of tem have rebooted by itself.
Cisco IOS Software, s3223_rp Software (s3223_rp-IPBASEK9-M), Version 12.2(33)SXI5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 22-Oct-10 14:31 by prod_rel_team
ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
cat6509-wc1 uptime is 1 day, 7 minutes
Uptime for this control processor is 1 day, 7 minutes
Time since cat6509-wc1 switched to active is 1 day, 6 minutes
System returned to ROM by power on (SP by watchdog NMI at PC 0x409D3EF8, address 0x0)
System restarted at 09:06:26 BRST Tue Mar 6 2012
System image file is "sup-bootdisk:/s3223-ipbasek9-mz.122-33.SXI5.bin"
Last reload reason: Reload Command
I have looked for reasons but I did not find any. Does anybody know what is it ?
Thanks
Rosa
Solved! Go to Solution.
03-07-2012 10:45 AM
you would have to get the tac involved and send them a show tech for them to analyze and see if they can see anything.
03-07-2012 11:54 AM
System returned to ROM by power on (SP by watchdog NMI at PC 0x409D3EF8, address 0x0)
This is the reason why your supervisor card rebooted. Don't know what that means, though.
Have you tried SXJ1 or SXJ2?
03-07-2012 10:45 AM
you would have to get the tac involved and send them a show tech for them to analyze and see if they can see anything.
03-07-2012 10:53 AM
Thanks a lot, but unfortunately we do not have access to tac.
Rosa
03-07-2012 11:54 AM
System returned to ROM by power on (SP by watchdog NMI at PC 0x409D3EF8, address 0x0)
This is the reason why your supervisor card rebooted. Don't know what that means, though.
Have you tried SXJ1 or SXJ2?
03-08-2012 04:02 AM
Shame on me. I was blind.
But ... why do you have asked me for SXJ1 or SXJ2, if power is the real problem ?
Rosa
03-08-2012 04:26 AM
Hi Rosa ,
Can you paste a :
remote command switch show version
Dan
03-08-2012 04:44 AM
cat6509-wc1#show version
Cisco IOS Software, s3223_rp Software (s3223_rp-IPBASEK9-M), Version 12.2(33)SXI5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 22-Oct-10 14:31 by prod_rel_team
ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
cat6509-wc1 uptime is 2 days, 37 minutes
Uptime for this control processor is 2 days, 37 minutes
Time since cat6509-wc1 switched to active is 2 days, 36 minutes
System returned to ROM by power on (SP by watchdog NMI at PC 0x409D3EF8, address 0x0)
System restarted at 09:06:26 BRST Tue Mar 6 2012
System image file is "sup-bootdisk:/s3223-ipbasek9-mz.122-33.SXI5.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco WS-C6509-E (R7000) processor (revision 1.4) with 458752K/65536K bytes of memory.
Processor board ID SMG1206N40E
R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
3 Virtual Ethernet interfaces
337 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
1915K bytes of non-volatile configuration memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x102
cat6509-wc1#
03-09-2012 01:51 PM
But ... why do you have asked me for SXJ1 or SXJ2, if power is the real problem ?
Watchdog timer isn't a power issue. It's either a bug or a hardware issue.
You sure you don't have any crashinfo files around?
03-09-2012 03:52 PM
We have SXI5 on probably 30 6500's and its been very stable so far . But ours are Sup 720's and not Sup 32's.
03-09-2012 04:25 PM
We've moved from SXI5 to SXJ1. Will be going up to SXJ2 by the end of this month.
03-09-2012 05:37 PM
Hi,
just to let you all know, SXI5 has some "ciritical" bugs which can case your boxes to reload. Many of them are fixed in SXI8a, but SXI is still a short-term release. If you wanna have a long-term release move to SXJ.
regards,
Dirk
03-10-2012 08:38 AM
Hi all ,
One of them is :
CSCtx50235 : 6500 crashes with SP due to RP and RP due to SP
Dan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: