Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ios aaa and telnet

I have aaa new model configured on a number of isr's(1800, 1900, 2900, 3800 etc).  When i have aaa configured, the telnet logins use that authentication and not the password in the line vty portion.  Is this by design.  would disabling aaa enable both telnet and aaa authentications, essentially making it a dual login. 

3 REPLIES

ios aaa and telnet

This is by design. AAA authentication takes precedence. You won't be able to get a default login because once you enable AAA, it immediately asks for a username to authenticate with.

HTH, John *** Please rate all useful posts ***
Purple

ios aaa and telnet

Hi,

aaa authentication login default line  should give the default login with aaa enabled but not both as you said.

Regards.

Alain.

Don't forget to rate helpful posts.

ios aaa and telnet

Alain....rated. I've never used that one, but it works...

HTH, John *** Please rate all useful posts ***
211
Views
5
Helpful
3
Replies