IOS Command

[JOHN APONTE]

Is there an equivalent SH TOP command for IOS.? SH TOP is useful when you want to know who the busy ports are in

CAT OS. Thanks for your support

[szahid]

Its a combo of 2 commands in IOS .

collect top 10 counters interface all

D-C6509-4A#sh top counters interface report

1w0d: %TOPN_COUNTERS-5-STARTED: TopN collection for report 2 started by console

Id Start Time Int N Sort-By Status Owner

-- ---------------------------- --- ---- --------- ------- ---------------------

1 17:13:18 UTC Fri Sep 14 2007 30 10 util done console

2 17:13:51 UTC Fri Sep 14 2007 30 10 util pending console

D-C6509-4A#sh top counters interface report 1

Started By : console

Start Time : 17:13:18 UTC Fri Sep 14 2007

End Time : 17:13:48 UTC Fri Sep 14 2007

Port Type : All

Sort By : util

Interval : 30 seconds

Port Band Util Bytes Packets Broadcast Multicast In- Buf-

width (Tx + Rx) (Tx + Rx) (Tx + Rx) (Tx + Rx) err ovfl

------- ----- ---- ------------------ ---------- ---------- ---------- ---- ----

Gi3/1 100 0 1042 6 0 3 0 0

Gi6/2 100 0 1654 17 1 16 0 1

Gi6/1 1000 0 0 0 0 0 0 0

Gi4/16 1000 0 0 0 0 0 0 0

Gi4/15 1000 0 0 0 0 0 0 0

Gi4/14 1000 0 0 0 0 0 0 0

Gi4/13 1000 0 0 0 0 0 0 0

Gi4/12 1000 0 0 0 0 0 0 0

Gi4/11 1000 0 0 0 0 0 0 0

Gi4/10 1000 0 0 0 0 0 0 0

hope this helps.

thanks

Salman.

[JOHN APONTE]

Will this work for the following switch/router?

WS-C3750G-48PS 12.2(25)SEE2 C3750-IPSERVICES-M

Thanks!

[jacobss914]

Uness they changed 12.2(5)SEE2 to include the collect command then no.

I know the collect command is not in WS-C3750-48P 12.2(25)SEE1 C3750-IPBASE-M

that I could find.

IRC_IT_Bench#collect top 10 counters interface all

^

% Invalid input detected at '^' marker.

IRC_IT_Bench#sh top counters interface report

^

% Invalid input detected at '^' marker.

Note: the pointers show up correctly when edited but not in the forums. First one should be under the l in collect, the second is under top.

[JOHN APONTE]

Is there another way to show the top ports on a 3750 switch? Do you have to upgrade the IOS?