IOS Deleted from a WS-C2948G

[afisher78]

Hi All,

I deleted the IOS from the bootflash: thinking i was going to be able to load one from xmodem or tftp via rommon. I have tried for a while now with no luck..im begining to think its not possible in this platform? Can someone please help, thanks!!!

[amit-singh]

Hi Friend,

You can use Xmodem/TFTP from rommon to recover the switch. Here is a document with the procedure listed.

http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00800949c3.shtml#cat4k_rec

HTH.

-amit singh

[mariovelasquez777]

Thank you so much ...i was able to get the switch back up and running.

Thanks AGAIN!

[smothuku]

Hi ,

Below link gives step by step procedure how to recover 2948G after deleting ios.

http://www.cisco.com/en/US/partner/products/hw/switches/ps663/products_tech_note09186a00800949c3.shtml#cat4k

Hope it helps you.

Thanks,

satish

[rdanevich]

I've had to do this once. The procedure was a bit misleading. Here's what I learned:

First on the switch type:

switch: copy xmodem: flash:xxxIOSxxxx.bin

You'll see something like:

CCC..............

(This has now become "Beat the Clock")

Now in Hyperterminal execute the file transfer from the send..... menu.

Hope this helps!