Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IOS Deleted from a WS-C2948G

Hi All,

I deleted the IOS from the bootflash: thinking i was going to be able to load one from xmodem or tftp via rommon. I have tried for a while now with no luck..im begining to think its not possible in this platform? Can someone please help, thanks!!!

  • LAN Switching and Routing
4 REPLIES

Re: IOS Deleted from a WS-C2948G

Hi Friend,

You can use Xmodem/TFTP from rommon to recover the switch. Here is a document with the procedure listed.

http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00800949c3.shtml#cat4k_rec

HTH.

-amit singh

New Member

Re: IOS Deleted from a WS-C2948G

Thank you so much ...i was able to get the switch back up and running.

Thanks AGAIN!

Silver

Re: IOS Deleted from a WS-C2948G

Hi ,

Below link gives step by step procedure how to recover 2948G after deleting ios.

http://www.cisco.com/en/US/partner/products/hw/switches/ps663/products_tech_note09186a00800949c3.shtml#cat4k

Hope it helps you.

Thanks,

satish

New Member

Re: IOS Deleted from a WS-C2948G

I've had to do this once. The procedure was a bit misleading. Here's what I learned:

First on the switch type:

switch: copy xmodem: flash:xxxIOSxxxx.bin

You'll see something like:

CCC..............

(This has now become "Beat the Clock")

Now in Hyperterminal execute the file transfer from the send..... menu.

Hope this helps!

385
Views
0
Helpful
4
Replies
This widget could not be displayed.