Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS Firmware for Router 7204VXR

Hi Netpro,

Appreciate anyone can tell me which is the correct IOS to be upgraded ? as currently i am using this c7200-dk8s-mz.122-37.bin

and i am looking for suitable version.

appreciate anyone can tell me ?

your reply will be highly appreciated.

thanks a lot.

Jack

4 REPLIES
Hall of Fame Super Gold

Re: IOS Firmware for Router 7204VXR

Hi Jack,

The highest you can go for the 12.2 version is 12.2(46a). dk8s means it's "DESKTOP/IBM IPSEC 56" feature set.

Go to the Cisco Feature Navigator (http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp) and search for the feature you want.

New Member

Re: IOS Firmware for Router 7204VXR

Hi Leolaohoo

thanks for your information, basically i didn't looking for special feature, this upgrade is because of company audit.

would you mind to suggest me which version will be suitable for this ? as i have gone through the list most of the IOS version seems like c7200-adventerprisek9-mz.124-24.T1.bin

seriously, i am afraid after load in router can not boot up due to bad image.

thanks bro.

your reply will be highly appreciated.

thanks a lot.

Hall of Fame Super Gold

Re: IOS Firmware for Router 7204VXR

Hi Jack,

Thanks for the rating.

This depends on the feature that is REQUIRED to be running on your router.

Hall of Fame Super Gold

Re: IOS Firmware for Router 7204VXR

Hi Jack,

Another thing to look for is the DRAM and Flash: requirement of the image.

220
Views
10
Helpful
4
Replies
CreatePlease login to create content