Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS for Cisco 2620 48mb

Hi,

I've search for ages to find an IOS for my Cisco 2620 router that has 48mb and can support the feature "ip http secure-server" is there an easy way to find this?

It seems the SDM gui tool needs this feature to work. My other Cisco 2620 has 96mb and has a bigger IOS but it can run that feature I mentioned and run the SDM tool.

Is there a IOS or do I need more memory?

3 REPLIES
New Member

Re: IOS for Cisco 2620 48mb

Hi There,

Features are IOS Dependent. & Each IOS version has its Minimum Requirements in terms of DRAM & FLASH.

For Your knowledge sake, we can Choose the IOS as per our Requirements using Cisco Feature Navigator @ http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

However, we need a CCO ID to access it.

In any case, I'd appreciate If you can provide "sh version" from both Routers , so that I can Provide the Exact Solution.

Thanks

New Member

Re: IOS for Cisco 2620 48mb

Hi, router b is fine and has 64mb (thought it was 96mb).

router a has 48mb, the SDM express installs onto router b but not router a. Both routers are C2620's.

The only parts I can't add to router a's config which I think are needed are "ip http secure-server" "transport input telnet ssh"

Router b

sh ver

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(26), RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by cisco Systems, Inc.

Compiled Mon 17-Mar-08 15:23 by dchih

ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

RouterB uptime is 1 minute

System returned to ROM by power-on

System image file is "flash:c2600-ik9o3s3-mz.123-26.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco 2620 (MPC860) processor (revision 0x200) with 61440K/4096K bytes of memory.

Processor board ID ******* (1277056474)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

1 FastEthernet/IEEE 802.3 interface(s)

2 Serial network interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

router a

RouterA#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-IK9O3S-M), Version 12.2(46a), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2007 by cisco Systems, Inc.

Compiled Wed 11-Jul-07 20:22 by pwade

Image text-base: 0x8000808C, data-base: 0x812D9374

ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

RouterA uptime is 0 minutes

System returned to ROM by power-on

System image file is "flash:c2600-ik9o3s-mz.122-46a.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco 2620 (MPC860) processor (revision 0x200) with 45056K/4096K bytes of memory.

Processor board ID ******** (3902584544)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

1 FastEthernet/IEEE 802.3 interface(s)

2 Serial network interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

New Member

Re: IOS for Cisco 2620 48mb

On Router a, we have 64 Mb RAM

On Router b, we have 48 Mb RAM

The Features HTTP Server & HTTP with SSL are Supported in 12.3 Line of Code & the min. requirements I found were 64 Mb RAM.

So I am afraid that a RAM Upgrade is required as I didnt find any IOS (with Required features) & 48 Mb RAM Combination.

I'd appreciate if you can have a Look @ Cisco feature Navigator yourself to try various Permutations & Combinations as Desired

Thanks & regards

1092
Views
0
Helpful
3
Replies
CreatePlease to create content