Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IOS for HWIC-2FE on 1841

I have a HWIC-2FE  WIC card i intend to use on an 1841 router however the Card is not recognized by router  

can some one advised on what IOS i could use that supports advance Ipservices on 1841

 

 

1 REPLY

According to the HWIC's data

According to the HWIC's data sheet you would need at least IOS version 12.4(20)T:

 

http://www.cisco.com/c/en/us/products/collateral/routers/2800-series-integrated-services-routers-isr/product_data_sheet0900aecd80581fe6.html

 

The only potential problem is that 192MB of RAM and 64MB of Flash are required to run the Advanced IP Services feature set of that IOS version or above.

55
Views
0
Helpful
1
Replies