The simple answer to your question is that you download IOS images from the Cisco site. But the problem is that to download IOS images you need a current maintenance contract for the router. This is one of the issues with purchase of used equipment, that in general you are not able to get new images for it. Perhaps you can check with where you purchased this router and see if they can do something about it?
I had a similar issue with one of my old cisco switches, I spoke to a friend of mine who is CCNA/CCNP and he downloaded the correct IOS for my switch as he has access to it all. That is the problemwhen buying old equipment via eBay or anywhere else, especially when they comewith old IOS that does not support newer commands.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...