Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS Image from switch to switch

Hi,

Thanks in advance !

I have struck in upgrading IOS image for few switches from TFTP server. All switches are in 10.10.29.X network. Atlast I found that these are blocked to access to server where IOS image is saved(TFTP). I am able to ping any switch to any switch in the network.

My question: Is there any procedure/chance that I can copy the Image file from swith flash to other switch flash. All switches are cisco 2950 switches.

Appreciated your help.

Thanks

Ranga

2 REPLIES
New Member

Re: IOS Image from switch to switch

Yes, you can do that. Please follow the details from this link:

http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a6744.shtml

HTH,

Sameer

Purple

Re: IOS Image from switch to switch

Yes just add the following to the 2950 config. Remove when done with the transfer.

tftp-server flash:

264
Views
5
Helpful
2
Replies