Hi - I downloaded an image for a Cat2960 that has k9 in the image name. I upgrade the ios and after sh run, I saw the crypto info. Does crypto need to be turned on? It doesn't appear to be on because my file access did not slow down. Also I want to set up crypto to another Cat2960 and Cat1841 router. Thanks - Dave
The crypto runs strictly in the switch. Having the crypto IOS allows you to establish a secure connection to the switch Via SSH, or HTTPS. The crypto image does not perform encryption to your actual data.
Hi - Thanks for the info. I have another issue with my switch and lan setup. My client computer needs to send the data across our network to connect to a vendor router. He wants to have it encrypted. Do you have any suggestions? I am going to setup "protected ports"(no forwarding of info) and "port security"(port set to mac address). This isn't encryption. Thanks - Dave
With your current setup I don't believe it can be done in a hardware configuration. Your best bet would be use a third party SSH tunneling software between the clients. I've never used this before but the only thing that came to mind.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...