c3750-ipserviceslmk9-tar.122-55.SE8.tar

Rawa Salah · ‎10-01-2013

Dears

please which of this two IOS Image is better to upgrade to my C3750 ?

c3750-ipserviceslmk9-tar.122-55.SE8.tar

c3750-ipservicesk9-mz 122-55 SE8

???????????????????

Leo Laohoo · ‎10-01-2013

Which of one is better ? whats the differences please ?............ Help me to give you Best rate

It seems that all of my honest reponses have been un-appreciated as reflected in your "1" star rating.

All of my reponses to this thread are therefore REMOVED.

Rawa Salah · ‎10-01-2013

No please mr Leo , please 4give . really Apreciated ur help ..................

Please help my circumstance and i need your help !!!!!!

Leo Laohoo · ‎10-01-2013

c3750-ipserviceslmk9-tar.122-55.SE8.tar

Use this IOS if your 3750 only has 16 mb of flash. If you have stack of switch and at least one of them has 16 mb flash, then use this file.

c3750-ipservicesk9-mz 122-55 SE8

Only use this file if your 3750G has 32 mb flash.

Rawa Salah · ‎10-01-2013

MR Leo Thank you very Much ......

but someone told me that need to upgrade the IOS to 15.0(1)SE , if i want to configure Flexible Netflow .....

Seb Rupik · ‎10-01-2013

Search for 'Flexible Netflow' here:

http://tools.cisco.com/ITDIT/CFN/jsp/by-feature-technology.jsp

The feature is available in its basic from in some 12.4 releases as well as 15.x .

Leo Laohoo · ‎10-01-2013

but someone told me that need to upgrade the IOS to 15.0(1)SE

Rawa,

If your switch has a 16 mb flash, then you will not be able to load IOS versions from 12.2(58)SE and higher. The highest IOS version you can load on a switch with 16 mb flash is 12.2(55)SE (and later).

Rawa Salah · ‎10-01-2013

Dears

thats memory Capacity of my Switch

cisco WS-C3750X-24 (PowerPC405) processor (revision A0) with 262144K bytes of memory.

whats your recomendation ?

Leo Laohoo · ‎10-01-2013

cisco WS-C3750X-24

That's not right.

The IOS filenames you've mentioned on the opening thread is for a 3750/3750G. IF you have a 3750X then you will not be able to load the IOS because they are meant for a different model of the switch.

My recommendation is to stick with 12.2(55)SE8.

Rawa Salah · ‎10-02-2013

Right MR Leo

because yesterday i tried to upgrade the ios , i faced the following

Switch#copy tftp: flash

Address or name of remote host []? 172.16.1.2

Source filename []? c3750e-universalk9-tar.150-2.SE1

Destination filename [c3750e-universalk9-tar.150-2.SE1]?

Accessing tftp://172.16.1.2/c3750e-universalk9-tar.150-2.SE1...

%Error opening tftp://172.16.1.2/c3750e-universalk9-tar.150-2.SE1 (No such file or directory)

is it related to your mention ?

Leo Laohoo · ‎10-02-2013

%Error opening tftp://172.16.1.2/c3750e-universalk9-tar.150-2.SE1 (No such file or directory)

That's wrong. Look at the filename you've specified. There's no file extension. Of course the response from the switch is, "where is this file you are talking about".

Rawa Salah · ‎10-02-2013

DEAR

PLEASE HELP ME AS SOON AS POSSIBLE

i upgraded the Switch , during botting i faced it and dont be complete

Switch uptime is 8 minutes, 15 seconds

cisco WS-C3750X-24 (PowerPC405) processor (revision A0) with 262144K bytes of memory.

Processor board ID FDO1701W1GR

01:35:45 UTC Wed Mar 30 2011: Unexpected exception to CPUvector 700, PC = FFFFFF2C

-Traceback= 0xFFFFFF2Cz

Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.2(1)E, RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Compiled Tue 27-Aug-13 11:06 by prod_rel_team

Program Exception (0x0700)!

SRR0 = 0x04002F60 SRR1 = 0x00029230 SRR2 = 0x02898534 SRR3 = 0x00029230

ESR = 0x08000000 DEAR = 0x00000000 TSR = 0x84000000 DBSR = 0x00000000

CPU Register Context:

Vector = 0x00000700 PC = 0x04002F60 MSR = 0x00029230 CR = 0x35000053

LR = 0x02005414 CTR = 0x00000000 XER = 0xE0000010

R0 = 0x00000000 R1 = 0x055D6E80 R2 = 0x00000000 R3 = 0x055D6EA0

R4 = 0x00000031 R5 = 0x055D6F54 R6 = 0x00000018 R7 = 0x0534A693

R8 = 0x0000001D R9 = 0x0534A690 R10 = 0x00000017 R11 = 0x00000050

R12 = 0x00000000 R13 = 0x0B98279C R14 = 0x00688E58 R15 = 0x00000002

R16 = 0x00000000 R17 = 0x0534A690 R18 = 0x00000001 R19 = 0x00000099

R20 = 0x04E2CDCD R21 = 0x051D0000 R22 = 0x00000000 R23 = 0x00000002

R24 = 0x00000001 R25 = 0x055D6ED4 R26 = 0x04E2C9F8 R27 = 0x00000036

R28 = 0x00000004 R29 = 0x04E2C9D8 R30 = 0x05FEE5D8 R31 = 0x0000003A

Stack trace:

PC = 0x04002F60, SP = 0x055D6E80

Frame 00: SP = 0x055D6F98 PC = 0x020052CC

Frame 01: SP = 0x055D70C8 PC = 0x02006668

Frame 02: SP = 0x055D70E8 PC = 0x02006CCC

Frame 03: SP = 0x055D7198 PC = 0x02006FB4

Frame 04: SP = 0x055D71B8 PC = 0x028D881C

Frame 05: SP = 0x055D71F8 PC = 0x026BC780

Frame 06: SP = 0x055D7208 PC = 0x022AA47C

Frame 07: SP = 0x055D7228 PC = 0x022AA648

Frame 08: SP = 0x055D7240 PC = 0x022AA798

Frame 09: SP = 0x055D7270 PC = 0x00688C68

Frame 10: SP = 0x055D7378 PC = 0x00688EA0

Frame 11: SP = 0x055D7380 PC = 0x02D5771C

Frame 12: SP = 0x00000000 PC = 0x02D51C54

Switch uptime is 8 minutes, 18 seconds

cisco WS-C3750X-24 (PowerPC405) processor (revision A0) with 262144K bytes of memory.

Processor board ID FDO1701W1GR

01:35:48 UTC Wed Mar 30 2011: Unexpected exception to CPUvector 700, PC = FFFFFF2C