Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS related

Hiii

I have a cisco 2960 switch.and i would not upload IOS for the cisco 2960 switch.When i am given IP in switch and local PC via conected for TFTP.

And When i m given these command it shuld give me error.

My cisco Switch IOS :-

Flash:C2960-Lanbase-MZ.122-35.SE5/C2960-Lanbase-MZ.122-35.SE5.bin

command:-

1-Copy flash TFTP

2-Source file :- for the switch

3:-IP address:-for PC

4:-Destination file:- for locate folder

5:-TFTP on

Error for that it should not connect

Please Help me immediate?:------

Regards

Pushpendra Kumar Tiwari

Network Engineer

1 REPLY

Re: IOS related

HI Pushpendra, [PLs rate if helps]

Can you please POST the Error you are getting during IOS Upgrade.

>> Ping from Switch to PC and viceversa = it should be OK and provide Ping Response only then you can do successful IOS Upgrade.

>> Make sure the TFTP is correctly mapped to the Folder where the correct IOS is stored.

>> Make sure your Windows XP / 2000 PC firewall is turned OFF.

Pls Rate if HELPS

Best Regards,

Guru Prasad R

117
Views
0
Helpful
1
Replies