Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

IOS Upgrade Path

Hey guys, I have a 6509E that we will be inserting a FWSMv3.1 into in the near future. It is currently running 12.2(18)SXD7b.bin. From what I understand the minimum requirement for FWSM is 12.2(18)SXF2. A few weeks ago we attempted 12.2(18)SXF10(now deferred) and it failed miserably with very unpredicatable results for connectivity.

Here is the current show modules of what I have installed with Slot 8 being allocated for the FWSM.

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAD0935071R

2 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAD092102RU

3 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL093813C0

4 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL09158WU5

5 2 Supervisor Engine 720 (Hot) WS-SUP720-3B SAL09380T27

6 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL09358GKH

7 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1006D1DS

9 8 Intrusion Detection System WS-SVC-IDSM-2 SAD10280A3A

1 REPLY
Community Member

Re: IOS Upgrade Path

Forgot to add my question, is anyone running a similar hardware configuration with the FWSM and if so, what IOS revision are you using in production?

Switching is standard stuff with some LAG ports along with EIGRP as the primary routing protocol.

Thanks in advance.

284
Views
0
Helpful
1
Replies
CreatePlease to create content