Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

IOS Upgrade Problem

I have 20 3560-48PS Switches that I cannot upgrade the IOS on I have tried using multiple TFTP Servers and XModem transfers but no luck, the switch starts to transfer the file but after about 70% it fails with "%Error opening tftp://172.16.100.203/c3560-advipservicesk9-mz.122-44.SE1.bin"

Any help would be greatly appreciated in this matter.

Cheers,

Michael

1 ACCEPTED SOLUTION

Accepted Solutions

Re: IOS Upgrade Problem

Michael,

It sounds like the flash memory on your switch is not big enough of storing two IOS images on it. You will need to remove the current IOS before copying the new IOS. Here is the command to remove the existing image.

delete /force /recurssive flash:/c3560-ipbase-mz.122-35.SE5.bin

HTH,

Mark

1 REPLY

Re: IOS Upgrade Problem

Michael,

It sounds like the flash memory on your switch is not big enough of storing two IOS images on it. You will need to remove the current IOS before copying the new IOS. Here is the command to remove the existing image.

delete /force /recurssive flash:/c3560-ipbase-mz.122-35.SE5.bin

HTH,

Mark

133
Views
0
Helpful
1
Replies
CreatePlease to create content