cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1537
Views
3
Helpful
4
Replies

IOS upgrade to AP

ney25
Level 2
Level 2

Hi Netpro,

anyone can help me about this ? i can't upload my IOS to AP.

AP01#dir

Directory of flash:/

2 -rwx 714 Mar 1 2002 08:00:07 +08:00 env_vars

7 drwx 512 Jan 14 2006 16:48:58 +08:00 c1200-k9w7-mx.123-7.JA1

3 -rwx 27 Jul 29 2007 12:35:34 +08:00 private-config

5 -rwx 4955 Jul 29 2007 12:35:34 +08:00 config.txt

6 -rwx 1048 Jul 29 2007 12:35:34 +08:00 private-multiple-fs

7741440 bytes total (2812416 bytes free)

AP01#dir c1200-k9w7-mx.123-7.JA1

Directory of flash:/c1200-k9w7-mx.123-7.JA1/

8 drwx 64 Jan 14 2006 16:34:32 +08:00 html

145 -rwx 3680688 Jan 14 2006 16:47:25 +08:00 c1200-k9w7-mx.123-7.JA1

146 -rwx 131328 Jan 14 2006 16:47:51 +08:00 5001.img

147 -rwx 131328 Jan 14 2006 16:47:54 +08:00 5101.img

148 -rwx 131328 Jan 14 2006 16:48:33 +08:00 6301.img

149 -rwx 131328 Jan 14 2006 16:48:37 +08:00 6701.img

150 -rwx 131328 Jan 14 2006 16:48:58 +08:00 6701_cal.img

151 -rwx 274 Jan 14 2006 16:48:58 +08:00 info

7741440 bytes total (2812416 bytes free)

AP01#copy tftp flash:/c1200-k9w7-tar.123-8.JA2/c1200-k9w7-tar.123-8.JA2.tar

Address or name of remote host [172.17.62.71]?

Source filename [c1200-k9w7-tar.123-8.JA2.tar]?

Destination filename [/c1200-k9w7-tar.123-8.JA2/c1200-k9w7-tar.123-8.JA2.tar]?

Accessing tftp://172.17.62.71/c1200-k9w7-tar.123-8.JA2.tar...

%Error opening tftp://172.17.62.71/c1200-k9w7-tar.123-8.JA2.tar (Permission denied)

regards,

Jackal

2 Accepted Solutions

Accepted Solutions

Amit Singh
Cisco Employee
Cisco Employee

Jackal,

You are using a wrong procedure to upload the IOS on the AP. You are using a .tar file and this will not work with the normal " copy" command. You have to extract this .tar file to use the files which are inside this zipeed file. You have to use the following command:

archive download-sw /overwrite /reload tftp://172.17.62.71/c1200-k9w7-tar.123-8.JA2.tar

Please use the link below for more understanding:

http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38mfw.html#wp1035507

HTH,please rate if it does.

-amit singh

View solution in original post

though above post from asingh2 is at place.

Kindly check your tftp application setings that its enabled for transmit/receive as there erro showing "permission denied+ after accessing the tftp server.

Thanks EM

kindly rate all post if it helps.

View solution in original post

4 Replies 4

Amit Singh
Cisco Employee
Cisco Employee

Jackal,

You are using a wrong procedure to upload the IOS on the AP. You are using a .tar file and this will not work with the normal " copy" command. You have to extract this .tar file to use the files which are inside this zipeed file. You have to use the following command:

archive download-sw /overwrite /reload tftp://172.17.62.71/c1200-k9w7-tar.123-8.JA2.tar

Please use the link below for more understanding:

http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38mfw.html#wp1035507

HTH,please rate if it does.

-amit singh

though above post from asingh2 is at place.

Kindly check your tftp application setings that its enabled for transmit/receive as there erro showing "permission denied+ after accessing the tftp server.

Thanks EM

kindly rate all post if it helps.

I think the error that we are getting " error opening file" is probably because AP is not able to open and copy the file to the flash as it is a .tar file and a .tar file cannot be exatracted/opened using a copy command. The " archieve " command is the one which will work here.I believe that there is nothing wrong with the TFTP, probably its the command access for using the file.

-amit singh

I Have a problem, trying to upgrade My AP 1120B from 12.2(13)JA2 to 12.3.8-JA2(ED).

I followed the link listed before. But I have a problem with the tftp Server. The tftp Solaris SERVER says that archive does not exist.

Inside the AP:

error opening tftp://10.0.0.2/c1100-k9w7-tar.123-8.JA2(No such file or directory).

I have configured correctly the tftp server because doing the same task with other routers it works perfectly.

If some one can help me.

thanks.

Review Cisco Networking products for a $25 gift card