Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ios uploading using xmodem in 3750 switch

Hi Support,

Shiva here how can i upload new ios in 3750 switch using xmodem ? because i deleated flash of the same switch.

3 REPLIES

Re: ios uploading using xmodem in 3750 switch

New Member

Re: ios uploading using xmodem in 3750 switch

Thanks alot Mahmood.

Do u know any practical truobleshooting orinted books for ccnp and ccie in routing and switching.If u have pls send the link.

K bye

Take care...........

Regards,

Shivanand

Hall of Fame Super Silver

Re: ios uploading using xmodem in 3750 switch

Hello Shiva,

you can use the procedure

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.1_14_ea1/configuration/guide/swtrbl.html#wp1099467

note: setting the speed to 11500 bps can save hours of download time I did it you need the change the parameters on the device and then on the PC terminal emulator before starting the download.

but if you didn't switch off the switch you can use TFTP to write the image on your flash becuase you still have an IOS running

Hope to help

Giuseppe

9141
Views
0
Helpful
3
Replies