06-08-2012 02:51 PM - edited 03-07-2019 07:09 AM
I need Help, I don't have enought space in flash:
switch: format flash:
Are you sure you want to format "flash:" (all data will be lost) (y/n)?y
flashfs[0]: 0 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 1728000
flashfs[0]: Bytes used: 1024
flashfs[0]: Bytes available: 1726976
flashfs[0]: flashfs fsck took 2 seconds.
Filesystem "flash:" formatted
switch: dir flash:
Directory of flash:/
2 -rwx 81 <date> env_vars
1726464 bytes available (1536 bytes used)
All Ios from Cisco page are 1.8 MB
thanks in advance.
06-08-2012 04:25 PM
The 2900-XL is very very old and the flash can't be upgraded. The easiest way to remedy this issue may be to get a different switch with more flash.
HTH
06-08-2012 04:43 PM
Hi,
As Reza says this is old kit now.
As you only have 2M flash you need to read this doc
You can only use IOS up to
11.2.8SA6
You can no longer download these version from CCO
I they are also out of support so TAC wont take a case.
If you have another similar switch you could copy the IOS to TFTP then on to your switch.
Regards,
Alex.
Please rate useful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide