IOS WS-C2924-XL

[girozrodrigo]

I need Help, I don't have enought space in flash:

switch: format flash:

Are you sure you want to format "flash:" (all data will be lost) (y/n)?y

flashfs[0]: 0 files, 1 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 1728000

flashfs[0]: Bytes used: 1024

flashfs[0]: Bytes available: 1726976

flashfs[0]: flashfs fsck took 2 seconds.

Filesystem "flash:" formatted

switch: dir flash:

Directory of flash:/

2    -rwx  81        <date>               env_vars

1726464 bytes available (1536 bytes used)

All Ios from Cisco page are 1.8 MB

thanks in advance.

[Reza Sharifi]

The 2900-XL is very very old and the flash can't be upgraded. The easiest way to remedy this issue may be to get a different switch with more flash.

HTH

[acampbell]

Hi,

As Reza says this is old kit now.

As you only have 2M flash you need to read this doc

http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00800946e5.shtml#xlmodels

You can only use IOS up to

11.2.8SA6

You can no longer download these version from CCO

I they are also out of support so TAC wont take a case.

If you have another similar switch you could copy the IOS to TFTP then on to your switch.

Regards,
Alex.
Please rate useful posts.