Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

ios

Hi,

Has anyone using IOS 12.2(44)SE2 for Catalyst Switches ever notice that "show version" output is strange?

It shows the DRAM usage as "with 0K/12280K bytes of memory." and doesn't show the FLASH at all.

TIA

Dandy

  • LAN Switching and Routing
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ios

Just in case you still interested. The bug ID is CSCsq70343.

Regards,

jerry

4 REPLIES
Bronze

Re: ios

Hi Dandy.

Don't know for sure, but I believe that I have seen a bug reported regarding this issue, i.e. the IOS version erroneously does not show the right amount of memory.

You could try to upgrade to a newer version of IOS and see if it amkes a difference.

HTH, Ingolf

Re: ios

Hi Ingolf,

Thanks for your reply.

I was looking for a bug about this but I can't find one. Anyway, I'm upgrading them soon to avoid more problems.

Best wishes,

Dandy

Hall of Fame Super Gold

Re: ios

I'm not sure what model your switch is but you can upgrade to 12.2(46) or the 12.2(50) and higher version. 

If you upgrade to the 12.2(50) and higher, please don't be alarmed if the first-time-boot process takes twice as long as this IOS will upgrade the bootstrap (one off).

Cisco Employee

Re: ios

Just in case you still interested. The bug ID is CSCsq70343.

Regards,

jerry

376
Views
8
Helpful
4
Replies
This widget could not be displayed.