It all depends on what features you are running. You would need to read the release notes for the version you want to use before depoying it. Anyway I use "cat4500e-universalk9.SPA.03.04.01.SG.151-2.SG1.bin" and it seems to be pretty good.
Actually i have deployed these switches and configured VSS with above mentioned image but we are facing issue is that when we ping gateway ip configured on switch by connecting laptop on same switch, i find avg. latency 4-5ms which is pretty high.
Hi.. Pls suggest on this, also i am facing another issue which is that when any machine, connected to access switch which is connected to core VSS through etherchannel, is disconncted and another machine of same ip and is conncted to switch on same port then this machine doesnt get reachable. Also when i do clear arp the arp entry doest update with new machine.
I dont know why this is happening. Could you pls suggest any resolution.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...