Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

IP Accounting on the Catalyst 3560

I have a 3560 running 12.(46)SE and According to the configuration guide, the ip accounting is not supported. Is there any version that supports this feature?

5 REPLIES

Re: IP Accounting on the Catalyst 3560

Hi

I think it is supported in enhanced image.

Thanks

Mahmood

New Member

Re: IP Accounting on the Catalyst 3560

Unfortunately not. Looking at the 12.2(50)SE Command Reference ip accounting is not shown.

HTH

Jonathan

Hall of Fame Super Bronze

Re: IP Accounting on the Catalyst 3560

"ip accounting" isn't supported on any type of Cisco switch as the traffic flow is processed in hardware and packets processed by the "ip accounting" command are software-based flows.

For traffic profiling on a low-end switch as the 3560, you will need some 3rd party application as NetFlow is supported on Cat4500 and onward.

HTH,

__

Edison.

Bronze

Re: IP Accounting on the Catalyst 3560

Thanks Edison,

Any application that you might recommend?

rgrd,

Hall of Fame Super Bronze

Re: IP Accounting on the Catalyst 3560

3818
Views
4
Helpful
5
Replies