IP NAT rule getting disappeared from Cisco 3845 router running config
We have a cisco 3845 Router. We have 2 proxies running and both are given a one to one nat on the router. Last week an IP NAT rule of the first proxy has disappeared from the running config, but still listed in the startup. We have restarted and the issue is fixed for 4 days. After that the IP nat rule of the second proxy has been disappeared all of a sudden from Running. Instead of restarting we have manually entered the rule and it worked for half an hour. Again disappeared. Restarted. We have assigned another public ip for the second proxy and it worked for 3-4 days. After that again disappeared. Kindly advice what could be the issue.
IP NAT rule getting disappeared from Cisco 3845 router running c
I ran into this problem some time ago. It's a software bug.
What version of IOS are you running? Have you tried upgrading to latest M or GD release? The latest version for this platform is 15.1(4)M7, which is the last stable train for the ISR G1 platform (I know the bug definitely didn't exist in 15.1M).
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...