First, I am a novice, so my questions may seem simple--or not.
I just had a VPN installed that is allocated 6Mbps of our 20Mbps, and it is supposed to handle only Google traffic for now. I am in China, which is why I am having to do this in the first place; China loves to hate Google, and the Great Firewall of China filters heavily or completely shuts down GoogleApps.
I just discover that the company that installed the VPN is routing all my traffic through their router, which leaving my remaining 14 Mbps unused, since the VPN is trottled at their end; plus, I do not want Asia traffic going through the VPN.
I am trying to modify the config so that all traffic except the ones listed for _netblocks.google.com go through my primary router. Here is my proposed code:
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0 126.96.36.199
ip route 188.8.131.52 255.255.224.0 GigabitEthernet0/0 184.108.40.206
ip route 220.127.116.11 255.255.224.0 GigabitEthernet0/0 18.104.22.168
ip route 22.214.171.124 255.255.240.0 GigabitEthernet0/0 126.96.36.199
ip route 188.8.131.52 255.255.192.0 GigabitEthernet0/0 184.108.40.206
ip route 220.127.116.11 255.255.128.0 GigabitEthernet0/0 18.104.22.168
ip route 22.214.171.124 255.255.240.0 GigabitEthernet0/0 126.96.36.199
ip route 188.8.131.52 255.255.0.0 GigabitEthernet0/0 184.108.40.206
ip route 220.127.116.11 255.255.240.0 GigabitEthernet0/0 18.104.22.168
ip route 22.214.171.124 255.255.240.0 GigabitEthernet0/0 126.96.36.199
ip route 188.8.131.52 255.255.0.0 GigabitEthernet0/0 184.108.40.206
ip route 10.1.0.0 255.255.0.0 10.200.1.2
ip route 10.10.0.0 255.255.0.0 10.200.1.2
ip route 10.11.0.0 255.255.0.0 10.200.1.2
Obviously, I am doing something wrong. When I apply the config, the first line "ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0 220.127.116.11" is removed, and all my traffic stops.
Any help or suggestions are appreciated. Any recommendation for cleaning up the code and making it more professional is also welcome.
Obviously, I am doing something wrong. When I apply the config, the first line "ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0 18.104.22.168" is removed, and all my traffic stops. This is because you are removing the default route completely so the whole unknown (generally traffic to internet could) will be stop working.
I think you are talking about client vpn installed on your pc and accessing everything after connected to the client vpn. Try to point your google traffice pointing to your vpn gateway for example like... ip route 22.214.171.124 255.255.192.0 vpn gateway IP.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...