Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

IP Routing Issue on C3750 - unable to apply route map IP Policy

Hi

I have an issue with C3750 to add a route map for VLAN 1, the image is: c3750-ipservicesk9-mz.122-50.SE2.bin

..... my internal clients having issue to access pop3 (995) ....> The Firewall PIX 525 is the gateway... which allows the protocol.

Can anyone advise.

 

Regards,

Waqas

 

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Since it is 3750, make sure

Since it is 3750, make sure you are running the IP services image and have routing SDM. You can check that with "show version" and "show sdm prefer" correspondingly.

To change SDM template (note that reload is required):

     conf t

          sdm prefer routing

          end

     reload

HTH

Inayath

**Please rate this post if you find it usefull

2 REPLIES
Cisco Employee

Since it is 3750, make sure

Since it is 3750, make sure you are running the IP services image and have routing SDM. You can check that with "show version" and "show sdm prefer" correspondingly.

To change SDM template (note that reload is required):

     conf t

          sdm prefer routing

          end

     reload

HTH

Inayath

**Please rate this post if you find it usefull

New Member

Hi,Thanks.... Its worked....

Hi,

Thanks.... Its worked.... i am able to add route map to VLAN now...

Regards,

Waqas

 

57
Views
0
Helpful
2
Replies
CreatePlease to create content