Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ip san 10G nic with 3750x

hi all,

i checked my configuration now with ip san and it's connected with my 3750x 10G nic, there's no "spanning-tree portfast" command on it.  I don't remember if I have notes not to put it.  Just having error now when it's disconnect and reconnect and since there's no "spanning-tree portfast", it will be slow to reconnect therefore got an alert at night.

Do I need it and can i put it without any problem?

Thanks for any comment you may add.

1 REPLY
VIP Super Bronze

ip san 10G nic with 3750x

Hi,

Yes, as long as your switch is connected to host (server, PC, SAN, etc...) it is good idea to enable "spanning-tree portfast"

Also, portfast works whether the interface is 100Mb, Gig or 10Gig.

HTH

143
Views
0
Helpful
1
Replies