IP SLA issue

[vaibhav-g]

Hi

we have 6509-E switch and SUP-720-3B.

s72033-ipservicesk9_wanmz.122-33.SXH3a.bin, this IOS does not support this module WS-X6066-SLB-APC but support IP SLA.

WHEN we have changed this IOS to this IOS

s72033-adventerprisek9_wan-vz.122-18.SXF15a.bin card (WS-X6066-SLB-APC )is supporting. but IP SLA commnads are not supporting as per cisco this version 12.-18.sxf support IP SLA.

this is a peculiar issue plse sugget ,what can be done on this ...plse provide any IOS which can support this card and IP SLA together...or provide any such cisco document which confirm the any limitation regarding hardware or IOS ,plse provide link or doc so we can check the same.

also we have tried so many other IOS but IP SLA commands are not taking if we go for 122-33.sxh than above module is not supported but in cisco tool IP SLA supported in each verion.

Regards

Vaibhav

[Edison Ortiz]

Vaibhav,

You can use rtr which is the previous version of ip sla

#do show ver | i SXF

IOS (tm) s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(18)SXF8

#rtr ?

<1-2147483647> Entry Number

key-chain Use MD5 authentication for RTR control message

low-memory Configure low water memory mark

reaction-configuration RTR Reaction Configuration

reaction-trigger RTR Trigger Assignment

reset RTR Reset

responder Enable RTR Responder

restart Restart an Active Entry

schedule RTR Entry Scheduling

http://www.cisco.com/en/US/docs/ios/ipsla/command/reference/sla_03.html#wp1023731

HTH,

__

Edison.

[vaibhav-g]

Hi Edison

thats mean Above suggested image is support all the features of IP SLA as well as supports the mentioned card.

also plse let us know about my query is their any document which suggest that 122-18.sxf support IP SLA. ANY SUCH DOCUMNET WHICH IS TELLING ABOUT LIMITATION IN THIS RELEASE OR ANY OTHER WORKARROUND.

Regards

Vaibhav