Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

IP SLA - not logging plus additional questions

I configured an IP SLA HTTP test and it appears to be working but it is not logging via syslog (or sh log) and it is not sending traps.  My code is 124-24.T3 on a 2801 router.

1) What do I need to change to  enable logging of my IP SLA results, etc.?

2) What does the "Operation time to live: 2013 sec" value mean? Typically it says "Forever" but this one has a countdown when the threshold isn't  met? What is the countdown for?

config and output

logging trap debugging

snmp-server enable traps ipsla
snmp-server enable traps syslog

snmp-server host 192.168.1.125 version 2c <hidden>  ipsla syslog

ip sla responder

ip sla logging traps

ip sla 80

http get http://www.google.com name-server 8.8.8.8

timeout 2000

threshold 200

owner mobiusadmin

tag Google website

frequency 120

ip sla schedule 80 start-time now

ip sla reaction-configuration 80 react timeout threshold-type immediate action-type trapOnlyip sla responder
ip sla logging traps

Thank you,

1 REPLY
Community Member

IP SLA - not logging plus additional questions

My fault. I left of the "life forever" parameter which is why the operation defaults to 3959 seconds or something like that.

As for the logging, I was hoping to capture these stats somehow via syslog but I don't think it's possbile.

145
Views
0
Helpful
1
Replies
CreatePlease to create content