Thank you Zeeshan. The real problem is the SG series IOS, or the enterprise class IOS has a problem that, they do not support EIGRP stub networks. Recenlty we upgraded, but one of our eigrp stub network lost connectivity.
Sorry I meant the software should not feature EIGRP stub routing, since we have few stub branch office connected. So searching for a software with IP SLA, PBR with multiple tracking options, but no EIGRP stub routing.
Unfortunately in the cisco site i could not any IOS with enterprise version, hope this requires additional license.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...