IP SLA TCP-Connect object and getting it to syslog
I have an ip sla that is doing a tcp-connect to a web host to check availability.
I'm using a track command to then remove a route accordingly (failover through another route due to static routing).
I have a need to syslog this so that I can then have my syslog server report this to me.
change events are not syslogging and the TAC has suggest an IOS upgrade as a possible path. However this is on my core 6500 router and i'd rather not do an upgrade (and thus downtime) if at all possible.
note# routes below are for a test case that I have that is working and I can easily change to do with default routes once I get the test case to show syslogs so I can come in to work, and KNOW somethings changed without having to look at the device.
ip sla monitor logging traps ip sla monitor 1 type tcpConnect dest-ipaddr 18.104.22.168 dest-port 443 control disable ip sla monitor reaction-configuration 1 connection-loss-enable ip sla monitor schedule 1 life forever start-time now
track 1 rtr 1 reachability delay down 1 up 1
so my route that I change when it's up is this:
ip route 22.214.171.124 255.255.255.0 172.16.0.199 10 track 1
and when it fails I have a static route of metric 100 that takes over because the above is removed.
this works wonderfully, however, NO SYSLOG EVENTS.
I tried implemented an EEM script, however as i'm on version 2.1 I cannot do the 'event TRACK' command based using SNMP.
has anyone done anything like this? Any thoughts on a better way to get something to log? can i make a script to look at my route tables? That would work for me i suppose.
thanks in advance.
this is on a 6509 running s72033-ipservicesk9_wan-mz.122-33.SXH.bin for an image.
If this question is best suited somewhere else, admins: please feel free to move it.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...