Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

IP subneting

hi, i have a network 10.x.96.160/27 total 30 hosts are there in the network. I want 6 IPS seperately so can i vlsm to get the 6 ip seperately and rest of the IPS i want to use seperately.

3 REPLIES
Bronze

Re: IP subneting

Dear ,

Wubnet your class as given below to make 6 IP's on each class .

10.X.96.160 /29

10.X.96.168 /29

10.X.96.176 /29

10.X.96.184 /29

Regards

Haris

New Member

Re: IP subneting

I want to divide in 2 networks, one is for 6 ips so i can take 1st one .160/29 and another is for rest. so pls. can you tell me what will be network ip and subnet mask for rest of the ips.

Silver

Re: IP subneting

what are you wanting?

You are not very clear in what you are wanting to do.

You want to subnet the block.

This much is understood.

You have a /27 which provides 32 addresses, 30 usable.

How many subnets do you want and how many hosts in each subnet do you want?

According to this last post you want 2 subnets, which by your statement would be a /28

16 addresses each, 14 usable.

Then you mention a /29

So, by what you need you will have more than 2 subnets. You will end up with 3, a /28 and 2 /29's

10.0.0.0/27

10.0.0.0 - .31

10.0.0.1 - .30

/28 255.255.255.240

10.0.0.0 - .15

10.0.0.1 - .14 (usable)

/29 255.255.255.248

10.0.0.16 - .23

10.0.0.17 - .22 (usable)

/29 255.255.255.248

10.0.0.24 - .31

10.0.0.25 - .30 (usable)

Is this what you are talking about?

224
Views
0
Helpful
3
Replies
CreatePlease to create content