12-07-2017 03:38 AM - edited 03-08-2019 01:01 PM
Hello I am trying to config router(1941 or 2811) with RIP summary address
But its showing me error in syntax
Just created new router object and typing
interface Serial0/1/0 ip add 172.16.1.1 255.255.255.0 ip summary-address rip 172.16.1.0 255.255.255.252
Solved! Go to Solution.
12-07-2017 10:11 AM
well then its not supported only eigrp is for summary addresses , does it even let you in general configure RIP in global config ..router rip , its supported on real routers , there virtual so there stripped down images
You could do it in GNS3 as that uses full Cisco IOS images with all features available
12-07-2017 04:26 AM
12-07-2017 09:47 AM
Only egrp
12-07-2017 10:11 AM
well then its not supported only eigrp is for summary addresses , does it even let you in general configure RIP in global config ..router rip , its supported on real routers , there virtual so there stripped down images
You could do it in GNS3 as that uses full Cisco IOS images with all features available
12-07-2017 10:52 AM
Hello
agree with Mark it does work in gns3 simulations - just verified it
Res
paul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide