Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ip unnumbered with 2 FE Ints?

Hi,

Is it possible to use ip unnumbered on fasteth interfaces?

With the following config, if we connect a device with 192.168.122.2/24 to FE 0/0 we are unable to ping 192.168.122.1?

interface FastEthernet0/0

no ip address

duplex auto

speed auto

!

interface FastEthernet0/0.1

ip unnumbered FastEthernet0/1

!

interface FastEthernet0/1

ip address 192.168.122.1 255.255.255.0

duplex auto

speed auto

3 REPLIES
Hall of Fame Super Silver

Re: ip unnumbered with 2 FE Ints?

What kind of device is it and how is it connected to FA0/0?

The use of ip unnumbered was originally restricted to point to point serial interfaces. Cisco has extended the concept and now you can configure VLAN subinterfaces of a router as ip unnumbered. This presumes that the connection on the interface is a trunk. So is the device that is connected doing trunking?

HTH

Rick

New Member

Re: ip unnumbered with 2 FE Ints?

The device currently connected to FA0/0 is simply a Laptop - We will be connecting the router(1841) to a cisco switch and running dot1q.

So, if we have somthing like:

interface FastEthernet0/0.10

encapsulation dot1Q 10

ip unnumbered FastEthernet0/1

With vlan 10 running on switch port, and a trunk port back to 1841 FA0/0, it should work?

Hall of Fame Super Silver

Re: ip unnumbered with 2 FE Ints?

I believe that this should work.

HTH

Rick

200
Views
4
Helpful
3
Replies