Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

(IPv6) DHCP-Server is not reachable (via connection)

Hi!

We are trying to setup an IPv6 DHCP-Server on a Cisco 878 (c870-advipservicesk9-mz.124-15.T13.bin). There is another problem with the availability of the router. When you boot the router, he is broadcasting the IP-addresses but after about 30 minutes he going “stealth”. He doesn´t broadcast any more and he is not reachable via ping. Only a reboot can “solve” the misery/situation.

Do you have any guess/clue?

Here is a part of the code:

-------------------------------------------------------------------

!

ip name-server 2001:XXX:XXXX:6::53

!

ipv6 unicast-routing

no ipv6 source-route

ipv6 cef

ipv6 dhcp pool dhcppool

prefix-delegation 2001:XXX:668::/48 0007

dns-server 2001:XXX:XXXX:6::53

dns-server 2001:XXX:XXXX:6:0:153:235:53

domain-name blablabla.com

!

!

interface Loopback0

no ip address

ipv6 address 2001:XXX:668:111::1/128

ipv6 enable

!

interface Vlan20

ip address 10.X.X.1 255.255.255.0

ipv6 address 2001:XXX:668:1::1/64

ipv6 enable

ipv6 dhcp server dhcppool

!

ipv6 local pool dhcppool 2001:XXX:668::/48 50

-------------------------------------------------------------------

4 REPLIES
Hall of Fame Super Silver

Re: (IPv6) DHCP-Server is not reachable (via connection)

Hello Hannes,

this looks like a SW bug so I would suggest to download and install a newer image for your router and to test with it

I couldn't find a match using IPv6 DHCP in bug toolkit

Hope to help

Giuseppe

New Member

Re: (IPv6) DHCP-Server is not reachable (via connection)

Fine Thnx. I will try a newer one, if i find one that maches my needs.

New Member

Re: (IPv6) DHCP-Server is not reachable (via connection)

I´m now booting the latest (stable) version (c870-advipservicesk9-mz.124-22.T5.bin) but the problem is still the same.

For testing reasons i disabled the whole ipv6 code to see how it is running only with ipv4, and under ipv4 everything works fine.

Hmmm. Any other guesses?

New Member

Re: (IPv6) DHCP-Server is not reachable (via connection)

Status update: When I´m pinging the DNS-server and the router from my pc, the router won´t ever crash. But when i start a download from an ipv6 ftp-server, the router is not reacheable after a few minutes.  It looks like that he can only handle icmpv6 messages but no ftp transfer. ;(

713
Views
0
Helpful
4
Replies
CreatePlease to create content