cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1307
Views
0
Helpful
1
Replies

(IPv6) DNS entry is not published by the DHCP-Server

ilgorro2010
Level 1
Level 1

Hi!

We are trying to setup an IPv6 DHCP-Server on a Cisco 878 (c870-advipservicesk9-mz.124-15.T13.bin). The clients (Windows XP) are getting no DNS entry from the DHCP-Server. We have to add them manually on every client (netsh), which is not very cool. Can you help me find the problem?

Here is a part of the code:

-------------------------------------------------------------------

!

ip name-server 2001:XXX:XXXX:6::53

!

ipv6 unicast-routing

no ipv6 source-route

ipv6 cef

ipv6 dhcp pool dhcppool

prefix-delegation 2001:XXX:668::/48 0007

dns-server 2001:XXX:XXXX:6::53

dns-server 2001:XXX:XXXX:6:0:153:235:53

domain-name blablabla.com

!

!

interface Loopback0

no ip address

ipv6 address 2001:XXX:668:111::1/128

ipv6 enable

!

interface Vlan20

ip address 10.X.X.1 255.255.255.0

ipv6 address 2001:XXX:668:1::1/64

ipv6 enable

ipv6 dhcp server dhcppool

!

ipv6 local pool dhcppool 2001:XXX:668::/48 50

-------------------------------------------------------------------

1 Reply 1

ilgorro2010
Level 1
Level 1

I´m now booting the latest (stable) version  (c870-advipservicesk9-mz.124-22.T5.bin) but the problem is still the  same.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: