Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Is it possible to have a network like this?

A layer 3 switch

----------------------

1* 2* 3* 4* 5* 6* 7*

----------------------

port 1 is directly connectted to laptop

port 2 is directly connected to a server

port 1 is enabled with 'no switchport' and has IP 10.1.1.1

Laptop has IP 10.1.1.2 with default GW 10.1.1.1

port 2 is enabled with 'no switchport' and has IP 14.130.13.108

server has IP 14.130.13.109

I want to ping the server (14.130.13.109) from laptop (10.1.1.1).Is is possible that a layer 3 switch can do such function by enabling routing or so ?

2 REPLIES
Silver

Re: Is it possible to have a network like this?

Hi,

Yes this can be done,

Just make sure you enable ip routing on the switch and you set the gateway for pc to 10.1.1.1 and for server to 14.130.13.109.

HTH

LR

Community Member

Re: Is it possible to have a network like this?

Thanks LR.

time to read basics again for me :-)

i did not put Default gateway of Server .

it is working now :)Gr8 thanks

101
Views
0
Helpful
2
Replies
CreatePlease to create content