Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Is it possible to securely route traffic?

At our main office we have the main network and a small vlan network for hosting a set of terminal servers for another office. Lets say the main office IP is 192.168.0.1/24 and a routed port for hosted network is 10.0.0.1/24. This is all running on a 3560-E, it has a routed port connected to a wireless bridge to the remote site. At the other end of the bridge is a 3550-emi with another routed port. 172.16.0.0/29 if it matters. Off of the 3550 there is the normal vlan 1 192.168.1.1/24 which is a branch of the main office. Then there is another routed port 10.0.1.1/24 which goes along with hosted routed port at the main office.

So the main office 192.168.0.0/24 and it's branch 192.168.1.0/24 need to be able to talk and get to the internet.

Then the other network and it's branch 10.0.0.0/24 and 10.0.1.0/24 need to be able to do the same.

Is this even possible? what would be the best way to keep all this traffic separate. I would like to keep things at the main office on vlan's to make it easier to send into the ASA.

Thanks in advance.

1 REPLY
Bronze

Re: Is it possible to securely route traffic?

Enable the security policy and other necesscary security measures in your network.

http://www.cisco.com/en/US/netsol/ns170/networking_solutions_solution_segment_home.html

100
Views
0
Helpful
1
Replies