I cannot set track though I want to succeed priority to 20 lowering standby router when the link of FastEthernet4 interfaces is downed. Would there be a place I have to change some setting and check it where? .
Is it impossible possibly to carry out the TRACK command in CISCO861 router ? .
-------------------------- CISCO861(config)#int vlan 10 CISCO861(config-if)#standby 10 track fastEthernet 4 20 % Interface may already be tracked via tracking command CISCO861(config-if)#
Track setting isn't being done, an error message is indicated.
" % Interface may already be tracked via tracking command "
--------------------------- Though this command was tried.
interface Vlan10 ip address 192.168.0.12 255.255.255.240 ip inspect to-wan in ip nat inside ip virtual-reassembly ip tcp adjust-mss 1414 standby 10 ip 192.168.0.14 standby 10 priority 110 standby 10 preempt standby 10 track 10 decrement 20
CISCO861#sh standby Vlan10 - Group 10 State is Active 2 state changes, last state change 00:44:19 Virtual IP address is 192.168.0.14 Active virtual MAC address is 0000.0c07.ac0a Local virtual MAC address is 0000.0c07.ac0a (v1 default) Hello time 3 sec, hold time 10 sec Next hello sent in 1.664 secs Preemption enabled Active router is local Standby router is 192.168.0.13, priority 100 (expires in 10.896 sec) Priority 110 (configured 110) Track object 10 (unknown) Group name is "hsrp-Vl10-10" (default)
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...