I am having ISP issues with my cisco 2621. It is actually my clients. And in fighting with the ISP that it is thier problem, i want to make sure I cover all my grounds.
My cleints are experiencing no network access or internet access. They are a remote site that connects through a t1 to the hub site. That is how they get internet and network access through that t1 pipe to the hub site.
They have been intermittenly been down and experience sluggish network performance for the past 2 or 3 days.
I saw somewhere in the log about low memory. Can someone help check my memory for me. It looks low to me. I want to make sure this is not the problem.
Please see attched, i have provided all the show memory commands possible.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...