Is static NAT only way for DVR/Servers access?

[NInja Black]

Are static NAT the only way for allowing access to DVR/Server?

I have around 8 DVRs/Servers all in different networks, so 16 command lines for static NAT both ways.

Example:

For 1 DVR access-

ip nat inside source static 10.10.x.x 50.x.x.x

ip nat outside source static 50.x.x.x 10.10.x.x

Please let me know if there is a easier way to do it. The problem is I cant do dynamic as they all are in different locations (networks).

[John Blakley · Accepted solution]

Are you wanting access from the outside of the network? If so, you only need the "ip nat inside" line.

HTH,
John

*** Please rate all useful posts ***