Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Is there a way to update the config of multiple routers and switches?

Is there a way to update the config of multiple routers and switches. For changes which affect every router and switch such as changing the ip address of the tacacs server we have to manually change the config on every device which is very time consumuing. Surely there must be a better way of doing this?

5 REPLIES

Re: Is there a way to update the config of multiple routers and

Well, you will need to look into implementing network management software for it. With snmp push, you can actively change the config.

Network management software like Cisco Works or Nagios can do this in an automated way, once snmp read/write access has been provided to the relevant nodes that you need to re-configure.

I would start on doing research in that direction.

alternatively you might want to run a script from a Telnet client (such as secure CRT) that adds a desired command line

Please remember to rate useful posts, by clicking on the stars below.

Re: Is there a way to update the config of multiple routers and

If you have SecureCRT, I can provide a script that will do this for you. Just to add another app that can help, Solarwinds Network Configuration Manager.

New Member

Re: Is there a way to update the config of multiple routers and

If you can provide a script that would be great. I've not got SecureCRT but will download the trial version now.

Many Thanks

Darren

Re: Is there a way to update the config of multiple routers and

You will need to create the file C:\IOS-Passwword.txt In this file is the IP's of the devices you want to connect to. It should be in the format:

192.168.50.1

192.168.60.1

The script is for changing a password, however take a look at the script and you'll see you can change it to do anything you like. Here's a reference as well.

https://packetpros.com/netmon/SecureCRT.html

New Member

Re: Is there a way to update the config of multiple routers and

Thanks very much I'll give it a go.

188
Views
10
Helpful
5
Replies