Is there any adapter which can change a Giga Ethernet port to Giga optical port?
I have a 2950T switch which has 2 giga ethernet ports. There is one deployment I must use multimode fiber to connect two switches. I want to use 2950T for the deployment. But this switch doesn't have optical interface. I wounder whether we have the adapter to do that. I know there is adapter which change optical to ethernet.
Re: Is there any adapter which can change a Giga Ethernet port t
I'll second Collin's advice.
You could also look at Black Box and Allied Telesis for transceivers. I don't think Cisco do them.
I'd definately recommend getting a transceiver that will pass on no carrier errors between the different media types. Not all do this and it will potentially save you headaches in the future, particurarly in the case of cableing faults!
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...