Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Is there any wccp restriction for SUP2T + VSS

Hi Guys,

I'm working on a desing where I will use two CAT609-E each with a VS-SUP2T-10G.

and each chassis with the exact same number and type of WS-X68xx cards.

My customer requires among many things, wccp v2. His current solution is doing a L2 redirection to a WAE and GRE is not being used.

With the new hardware/Design he wants to enable VSS and I want to make sure wccp will continue to work without any restriccions.

Current wccp config on the existing CORE devices is:

ip wccp 61 redirect-list access-list-name

ip wccp 62 redirect-list access-list-name

SVIs for LAN

ip wccp 61 redirect in

SVIs for WAN

ip wccp 62 redirect in

and on WAE (4.4.1):

wccp router-list 1 IP-add-of-CORE IP-add-of-CORE2

wccp tcp-promiscuous service-pair 61 62 mask src-ip-mask 0xf dst-ip-mask 0x0

wccp tcp-promiscuous service-pair 61 62 failure-detection 30

wccp tcp-promiscuous service-pair 61 62 router-list-num 1 l2-redirect mask-assign

wccp version 2

so bottom line, is there any wccp restriccion with sup2t + +vss+ wccp?

Release note dont say anything about this combination.

Thank you!

Everyone's tags (6)
450
Views
0
Helpful
0
Replies