Hi all, can anyone give me some info on the types and standards used in isp networks, for example we have about 5 sites that all connect to the providers mpls backbone, then connect to my head office. How do they handle the routing from all other companies in the core etc, where do they start the mpls tagging? I looked on the router at my site and could see no mpls commands etc.
It is normal that the router at your site doesn't have MPLS enabled. This router is generally referred to as a Customer Edge router (or CE router). The mpls tagging as such starts on the router upstream from the CE router, which is generally referred to as Provider Edge router (or PE router).
Harold Ritter Sr. Technical Leader CCIE 4168 (R&S, SP) email@example.com México móvil: +52 1 55 8312 4915 Cisco México Paseo de la Reforma 222 Piso 19 Cuauhtémoc, Juárez Ciudad de México, 06600 México
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.