Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

issue with 6509 sup 720 please help

Hi all

Im running a 6509 vss pair, I noticed some logs on the system yesterday,looks liek there is an issue with the other supervisor in the chassis! see below

>sh log

Aug 15 23:34:02.793: %SYS-SW1-DFC5-5-RESTART: System restarted --

Aug 16 03:33:47.698: %OIR-SW1_SP-6-REMCARD: Card removed from slot 5, interfaces disabled

>sh module

Mod Ports Card Type                              Model              Serial No.

--- ----- -------------------------------------- ------------------ -----------

  1   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     SAL1428MTC8

  2   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     SAL1428MSZ4

  3   48  CEF720 48 port 1000mb SFP              WS-X6748-SFP       SAL1130VSGN

  4   48  CEF720 48 port 1000mb SFP              WS-X6748-SFP       SAL1427M95J

  5    0  Unknown (Other)                        Unknown            Unknown

  6    5  Supervisor Engine 720 10GE (Active)    VS-S720-10G        SAL1429MY7E

                  

Aug 15 23:34:02.793: %SYS-SW1-DFC5-5-RESTART: System restarted --
Aug 16 03:33:47.698: %OIR-SW1_SP-6-REMCARD: Card removed from slot 5, interfaces disabled

should I re seat the module, or power it off and on??

if I do this it shouldnt impact the system right ?

cheers

Carl

Everyone's tags (4)
10 REPLIES
VIP Purple

issue with 6509 sup 720 please help

which IOS versiuon u r running???

Regards

New Member

issue with 6509 sup 720 please help

hi the version is

12.2(33)SXI4a

VIP Purple

issue with 6509 sup 720 please help

Can u paste the whole output of the command:

sh module???

New Member

issue with 6509 sup 720 please help

Switch Number:     1   Role:   Virtual Switch Active
----------------------  -----------------------------
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  1   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     SAL1428MTC8
  2   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     SAL1428MSZ4
  3   48  CEF720 48 port 1000mb SFP              WS-X6748-SFP       SAL1130VSGN
  4   48  CEF720 48 port 1000mb SFP              WS-X6748-SFP       SAL1427M95J
  5    0  Unknown (Other)                        Unknown            Unknown
  6    5  Supervisor Engine 720 10GE (Active)    VS-S720-10G        SAL1429MY7E

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  1  c84c.75b8.2e08 to c84c.75b8.2e37   3.4   12.2(18r)S1  12.2(33)SXI4 Ok
  2  c84c.75b8.2808 to c84c.75b8.2837   3.4   12.2(18r)S1  12.2(33)SXI4 Ok
  3  001c.58be.5278 to 001c.58be.52a7   1.10  12.2(14r)S5  12.2(33)SXI4 Ok
  4  c84c.7578.aab0 to c84c.7578.aadf   2.4   12.2(18r)S1  12.2(33)SXI4 Ok
  5  0000.0000.0000 to 0000.0000.0000   0.0   Unknown      Unknown      Unknown
  6  0024.14e5.1a18 to 0024.14e5.1a1f   3.2   8.5(4)       12.2(33)SXI4 Ok

Mod  Sub-Module                  Model              Serial       Hw     Status
---- --------------------------- ------------------ ----------- ------- -------
  1  Centralized Forwarding Card WS-F6700-CFC       SAL1428MRBL  4.1    Ok
  2  Centralized Forwarding Card WS-F6700-CFC       SAL1429MZ9J  4.1    Ok
  3  Centralized Forwarding Card WS-F6700-CFC       SAL1131W12W  3.1    Ok
  4  Centralized Forwarding Card WS-F6700-CFC       SAL1427LXZF  4.1    Ok
  6  Policy Feature Card 3       VS-F6K-PFC3C       SAL1428MJCM  1.1    Ok
  6  MSFC3 Daughterboard         VS-F6K-MSFC3       SAL1427M6HZ  5.0    Ok

Mod  Online Diag Status
---- -------------------
  1  Pass
  2  Pass
  3  Pass
  4  Pass
  5  Unknown
  6  Pass

VIP Purple

issue with 6509 sup 720 please help

From this output I can not find the module which u r using:

if u r using this;WS-X6748-SFP or WS-X6748-GE-TX  these module

Note: This module is supported only on the  Cisco Catalyst 6500 Series Supervisor Engine 720 running.

Regards

New Member

issue with 6509 sup 720 please help

Hi There

Slot 5 is the supervisor module, Supervisor Engine 720 10GE (Active)    VS-S720-10G

what should I do here?

cheers

Carl

VIP Purple

issue with 6509 sup 720 please help

Hi Carl,

This module is supported only on the Cisco Catalyst 6500 Series Supervisor Engine 720 running Cisco Catalyst OS Version 8.1.2 or Cisco IOS® Software Release 12.2(17a)SX (available in the next few months) and future software releases.

Just try to reset the module and then try again.

Regards

New Member

issue with 6509 sup 720 please help

Hi there

I have removed the supervisor and plugged it back in.

however is still says unknown when I do a show module.

could this be a faulty card? is there any tests I can run?

cheers

Carl

Hall of Fame Super Gold

issue with 6509 sup 720 please help

If your current active supervisor card is running SXI4a, what IOS is the other supervisor running (the one in slot 5)?

The IOS should be the same or the supervisor card in slot 5 will go into ROMmon.

New Member

issue with 6509 sup 720 please help

I have this problem too,it has been solved?

753
Views
0
Helpful
10
Replies
CreatePlease to create content