Issue with Dhcp binding static ip to a mac address
I have currently a problem with binding a static IP address to a mac address, my code is like below:
router#show running-config Building configuration...
Current configuration : 2998 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname router ! boot-start-marker boot-end-marker ! logging message-counter syslog enable secret 5
! no aaa new-model ! dot11 syslog ip source-route ! ! ip cef ip dhcp excluded-address 10.1.1.1 10.1.1.54 ip dhcp excluded-address 10.1.1.56 10.1.1.100 ! ip dhcp pool test host 10.1.1.55 255.255.255.0 hardware-address 0015.582d.9377 ieee802 default-router 10.1.1.1 dns-server 220.127.116.11 ! ip dhcp pool pool1 network 10.1.1.0 255.255.255.0 default-router 10.1.1.1 dns-server 18.104.22.168
interface FastEthernet0/1 no ip address ip virtual-reassembly duplex full speed 100 ! interface FastEthernet0/1.1 description data encapsulation dot1Q 1 native ip address 10.1.1.1 255.255.255.0 ip nat inside ip virtual-reassembly
interface FastEthernet0/1.2 description voice encapsulation dot1Q 2 ip address 10.1.2.1 255.255.255.0 ip nat inside ip virtual-reassembly ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 1 interface FastEthernet0/0 overload access-list 1 permit 10.1.1.0 0.0.0.255 access-list 1 permit 10.1.2.0 0.0.0.255 snmp-server community public RO ! control-plane ! ! line con 0 exec-timeout 5 30 logging synchronous !
scheduler allocate 20000 1000 no process cpu extended no process cpu autoprofile hog end
However, after I rebooted my computer and the router, I still get a dhcp ip address which is not my desired one (10.1.1.55)..
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.1.1.1 - 2893.fe7a.4a71 ARPA FastEthernet0/1.1
Internet 10.1.1.215 6 0015.582d.9377 ARPA FastEthernet0/1.1
Please help to point out if I did something wrong... thanks in advance.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...