Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Issue with HSRP on cisco 4506

Hi,

Need some help in an issue faced with HSRP running on a pair of redundant packet filter firewalls configured using 4506 switches.

The setup is L3 routed ports on these switches and configured to act as a firewall. The main issue that we see is even though the secondary 4506 ports are in standby state we see it passing packets out. Hence it is affecting the operation. Usually we have routes to destination from both 4506, because of this issue we have removed the route on the secondary.

Please let me know if there is any solution to this .

1 REPLY
Hall of Fame Super Blue

Re: Issue with HSRP on cisco 4506

Balaji

It's not entirely clear what your topology is.

You say the 4500's are connected via routed ports then you talk about HSRP. Could do a quick topology diagram with addressing so we can help you further.

Jon

262
Views
0
Helpful
1
Replies