Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

issue with power drwan with poe

hi,

 

we are planning to deploy 3560x-48P-s switch for voip in our network that provide only 435 POE power

can we install 48 ip phone of 15.4 watt i.e 7975G that belong to class 3 of POE. will it work

please light also how many poe phone of class 1 , 2,  3 can be deployed with above switch

 

regards

rajat

1 ACCEPTED SOLUTION

Accepted Solutions

To install 48 class 3 devices

To install 48 class 3 devices will require that the switch have ~740W of PoE available. The 3560X-48PF-S, which can provide up to 800W of PoE is the appropriate device for your application.

With class 2 devices, you can put one device on each of your 48 ports without difficulty on a 3560X-48P-S. Even at maximum draw, they use less than half of the power of a class 3 device.

Class 1 devices won't be any trouble because they only use a little over half of what a class 2 device draws.

1 REPLY

To install 48 class 3 devices

To install 48 class 3 devices will require that the switch have ~740W of PoE available. The 3560X-48PF-S, which can provide up to 800W of PoE is the appropriate device for your application.

With class 2 devices, you can put one device on each of your 48 ports without difficulty on a 3560X-48P-S. Even at maximum draw, they use less than half of the power of a class 3 device.

Class 1 devices won't be any trouble because they only use a little over half of what a class 2 device draws.

31
Views
0
Helpful
1
Replies
CreatePlease login to create content