Issue with version c3750-ipservicesk9-mz.122-50.SE5.bin
I have a problema, we have several sites with switches WS-C3750-24PS-S, running versión c3750-ipservicesk9-mz.122-50.SE5.bin; Now what we are doing is that we are adding some WS-C3750V2-48PS-S and we are upgrading them to the same reléase c3750-ipservicesk9-mz.122-50.SE5.bin. We connect them through their GBICs, the problema we have is that when for some reason the new switches reload, they don’t save their configuration, it boots up and when it comes up, it just sits there as if it was a new switch, and has nothing saved.
We change the IOS to c3750-ipbasek9-mz.122-50.SE5.bin and we have not experienced the issue again, but i have been searching to see if there are known issues with the ipservices reléase but have not found any.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.